Configure Terminal Voice Service Voip Ssm Registrar; Configure Terminal Voice Service Voip Ssm Sessiontimer - Avaya 2330 Reference Manual

SSM commands
Example
AG/configure/voice/service/voip/ssm#provisioning subscriber
<subscriber> <domain> alias <alias-name> calling-line-id <calling-
line-id>

configure terminal voice service voip ssm registrar

Use this command to configure the SIP registrar for SIP survivability.
Syntax
[no] registrar [expires {max|min|default} <sec>] [max-contacts
<1-10>] [allow-backup-reg {all | refresh}]
Table 430: Variable definitions
[no]
expires {max|min|
default} <sec>
max-contacts <1-10>
allow-backup-reg {all |
refresh}
Example
AG/configure/voice/service/voip/ssm#registrar expires max 120

configure terminal voice service voip ssm sessiontimer

Use this command to configure session timer values in seconds. By default, session timer
values are max: 3600, min: 90, and default: 1800. Be sure to configure the min value to be
less than the default value, and the default value to be less than the max value, otherwise the
configuration is rejected.
388 Command Line Reference
Variable
Comments? infodev@avaya.com
Value
Removes the specified registrar configuration.
Specifies the range within which the expires header
value is accepted by the survivable SIP registrar. The
no form of the command sets the values for
maximum, minimum and default to their default
values (180, 180, and 180, respectively).
Specifies the maximum contacts that can be
registered for a single AOR. The no form of the
command sets the value to the default: 5.
Configures options to allow new registrations in
backup mode. all: Allow all registrations refresh:
Allow only registration refresh. Default value is all.
August 2013