show ipv6 general-prefix
Use this command to display the general prefixes that are configured through CLI and also
obtained from DHCPv6.
Syntax
show ipv6 general-prefix
Example
AG# show ipv6 general-prefix
show ipv6 interfaces
Use this command to display IPv6 interface configuration information. If no interface is
specified, information for all interfaces is displayed.
Syntax
show ipv6 interfaces [interface <interface-name>] [format {detail|
brief}]
Example
AG# show ipv6 interfaces ethernet0/3 format brief
show ipv6 mroute
Use this command to display the IPv6 multicast routing table.
Syntax
show ipv6 mroute [<group-ip>] [<source-ip>] [summary]
Table 194: Variable definitions
Variable
[<group-ip>]
[<source-ip>]
summary
Command Line Reference
Value
Specifies the group IP address
{<X:X::X:X>).
Specifies the source IP address
{<X:X::X:X>).
Specifies a summary display.
show ipv6 general-prefix
August 2013
199