Configure Aaa Tacacs Primary_Server|Secondary_Server; Configure Aaa Tacacs Retries; Configure Aaa Tacacs Server_Port - Avaya 2330 Reference Manual

AAA commands

configure aaa tacacs primary_server|secondary_server

Use this command to configure the IP address of the primary or secondary TACACS+
server.
Syntax
aaa tacacs [primary_server |secondary_server] <A.B.C.D>
Example
AG/configure# aaa tacacs primary_server 234.5.6.7

configure aaa tacacs retries

Use this command to configure the number of client attempts to communicate with the
TACACS+ server.
Syntax
[no] retries <1-5>
Table 305: Variable definitions
<1-5>
Example
AG/configure# aaa tacacs retries 5

configure aaa tacacs server_port

Use this command to configure the port used by the TACACS+ server.
Syntax
server_port <1-65535>
Table 306: Variable definitions
<1-65535>
282 Command Line Reference
Variable
Variable
Comments? infodev@avaya.com
Value
The number of attempts to contact the
server. The range is 1-5. The default is 2.
Value
The port on the TACACS+ server.
August 2013