MSTP commands
mstp revision
Use this command to configure the MSTP revision number.
Syntax
[no] revision <revision number>
Table 99: Variable definitions
Variable
[no]
<revision number>
Example
AG/configure/bridge/mstp# revision 1
spanning-tree
Use this command to access the Spanning Tree configuration context.
Syntax
spanning-tree
Example
AG/configure/interface/ethernet (6/1)# spanning-tree
spanning-tree link-type
Use this command to configure the link type.
Syntax
[no] link-type <type>
Table 100: Variable definitions
Variable
118
Command Line Reference
Value
Restores the default revision number (0).
The revision number that you assign. The
default value is 0. Valid values are 0 to 255.
Value
Comments? infodev@avaya.com
August 2013