SSH2 commands
Example
AG/configure/ssh_server# port 24
configure ssh_server restore
Use this command to restore the default SSH2 server parameter values.
Syntax
restore
Example
AG/configure/ssh_server# restore
configure ssh_server sftpd
Use this command to enable or disable the SSH secure FTP (SFTP) server. By default, the
SFTP server is disabled.
Syntax
[no] sftpd
Table 321: Variable definitions
no
Example
AG/configure/ssh_server# sftpd
configure ssh_server timeout
Use this command to configure the SSH session timeout.
Syntax
timeout <0-3600>
298
Command Line Reference
Variable
Comments? infodev@avaya.com
Value
Disables SFTP server.
August 2013