Turn Signal Relay - Honda 954 Service Manual

TURN SIGNAL RELAY

I M SPECTI ON
Remove the upper cowl (page 2-51,
Check the following:
- Battery condition
- Burned bulbs or non-specified wattage
Burnedfuse
-
- Ignition switch and turn signal switch function
-
Loose connectors
If the above items are all normal, check the following:
Disconnect the combination meter multi-connector
from the combination meter.
Short the WhiteiGreen and Gray terminals of the com-
bination meter connector with a jumper wire.
Start the engine and check the turn signal light by
turning the switch on.
Light comes on
Faulty turn signal relay (combination meter).
Poor connection of the connector.
Light does not come on
I
Broken wire harness
19-21