SYSTEM FLOW
PATTERN
SERVICE INFORMATION
TROUBLESHOOTING
SYSTEM TESTING
COOLANT REPLACEMENT
SERVICE INFORM AT1
GENERAL
Removing the radiator cap while the engine is hot can cause the coolant t o spray out, seriously scalding you.
Always let the engine and radiator cool down before removing the radiator cap.
Using coolant with silicate inhibitors m a y cause premature wear of water pump seals or blockage of radiator passages.
Using tap water m a y cause engine damage.
Add cooling system at the reserve tank. Do not remove the radiator cap except t o refill or drain the system.
All cooling system services can be done with the engine i n the frame.
Avoid spilling coolant on painted surfaces.
After servicing the system, check for leaks with a cooling system tester.
Refer to section 19 for coolant temperature sensor inspection.
6. COOLING
6-0
6- 1
6-2
6-3
6-4
0
N
THERMOSTAT
RADIATOR
WATER PUMP
RADIATOR RESERVE TANK
FAN CONTROL RELAY
SYSTEM
6-6
6-8
6-13
6-16
6-1 7