Honda 954 Service Manual page 186

FUEL SYSTEM (Programmed Fuel Injection)
Install the three collars and starter valve shaft.
Install the starter valve assembly into the valve hole
Tighten the starter valve lock nut t o the specified
torque.
TORQUE:
Compress the thrust spring and install the No.3/4
starter valve arm onto the starter valves.
Install and tighten the starter valve arm mounting
screws t o the specified torque.
TORQUE:
5-78
2 N - m (0.18 kgf-m, 1.3 Ibf-ft)
1 N - m (0.09 kgf-m, 0.7 Ibf-ft)
COLLARS