Note - Honda 954 Service Manual

FRONT WHEEL/SUSPENSION/STEEalNG
the direction of rotation marks o n the wheel and

Note

tire.
Remove the dust seals f r o m the wheel.
Mount the wheel, tire and brake discs assembly i n an
inspection stand.
Spin the wheel, allow it t o stop, and mark the lowest
(heaviest) point of the wheel with chalk.
Do this t w o or three times t o verify the heaviest area.
If the wheel is balanced, it will not stop consistently in
the same position.
To balance the wheel, install wheel weights o n the
highest side of the
marks. Add just enough weight so the wheel will n o
longer stop i n the same position when it is spun. Do
not add more than 60 grams t o the wheel.
DISASSEMBLY
Remove the bolts and brake
Remove the dust seals.
From the opposite side, install the bearing remover
shaft and drive the bearing out of the wheel hub.
Remove the distance collar and drive out the other
bearing.
TOOLS:
Bearing remover head,
Bearing remover shaft
the side opposite the chalk
rim,
m m 07746-0050800
25
07746-00501 00
o
I N SPECTI