Honda 954 Service Manual page 363

Before assembly, wash all parts with a high flash-
point or non-flammable solvent and wipe them dry.
Install the dust seal, stopper ring, new oil seal, back-
with its marked
up ring, and slider bushing.
side facing up.
Install a new fork pipe bushing.
Apply fork fluid to the oil seal lips.
Install the fork pipe into the fork slider.
Drive the
TOOL:
Oil seal
driver
Install the stopper
Do not scratch
rhe fork pipe slid- securely.
ing surface.
Install the dust seal.
oil
seal i n using the special tools.
ring into the fork slider groove
FRONT WHEEL/SUSPENSlON/STEERlNG
FORK PIPE
BUSHING
or
OA
only)
SLIDER BUSHING
OIL SEAL
4 3-21