Honda 954 Service Manual page 212

FUEL SYSTEM (Programmed Fuel Injection)
Install the exhaust pipe assembly (page 2-16).
Connect the EGCV control cables and adjust the con-
trol cables (page 5-93).
Remove the EGCV cover front upper bolt.
Install EGCV cable guide pulley cover and tighten the
bolts t o the specified torque.
TORQUE: 12 N-m (1.2 k g f m ,
VARIABLE AIR INTAKE VALVE
DISASSEMBLY
Remove the air cleaner housing (page 5-64).
Open the intake valve flap by hand, disconnect the
intake valve cable end from the drum.
Unhook the return spring ends f r o m the hooks.
If necessary, loosen the control cable nut and remove
the control cable from the air cleaner housing.
5-104
9
I
I
CONTROL CABLE
D R UM
SPRING