Honda 954 Service Manual page 272

CYLINDER HEAD/VALVES
Install the cylinder head.
If using a new bolt, remove the anti-rust additive f r o m
it.
Apply molybdenum disulfide oil t o the threads and
seating surface of the 9 mm bolts/washers and install
them.
Apply oil t o the 8 mm bolt threads and seating sur-
face.
Install the t w o 8 mm flange bolts.
Tighten the 9 mm bolts in a crisscross pattern i n 2 - 3
steps t o the specified torque.
TORQUE:
Tighten the 8 mm flange bolts
TORQUE: 24 N-m
Install the cam chain tensioner lifter onto the cylinder
head w i t h new gasket.
Install and tighten the mounting bolts.
Install the engine into the frame (page 7-71.
Apply molybdenum disulfide oil t o the outer surface
of the each valve lifter.
Install the shims and valve lifters into the valve lifter
bores.
-24
51 N-m (5.2 kgf-m, 38 Ibf-ft)
to the specified torque.
(2.4 kgf-m, 17 Ibf-ft)
GASKET
I
BOLTS