Honda 954 Service Manual page 376

FRONT WHEEL/SUSPENSION/STEERlNG
Install the new lock washer onto the steering stem.
Install and tighten the steering stem lock nut.
Align the tabs of the lock washer w i t h the grooves in
the lock nut and bend t w o opposite tabs (shorter)
down into the adjusting nut groove.
Install and finger tighten the lock nut.
Hold the lock nut and further tighten the lock nut with-
in 114 turn (90') enough to align its grooves with the
lock washer tabs.
Bend the lock washer tabs up into the lock nut groove.
Install the horn unit assembly and tighten the mount-
ing bolt.
Connect the horn unit connectors.
Install the brake hose joint and tighten the mounting
bolt.
Install the following:
- Fork legs (page 13-25)
- Handlebar (page 13-6)
Install the top bridge and steering stem nut.
Tighten the steering stem nut t o the specified torque.
TORQUE: 103 N.m (10.5 kgf-m,
Install the following:
- Front wheel (page 13-14)
- Upper cowl (page 2-6)
13-34
76
LOCK NUT
LOCK WASHER TAB