Honda 954 Service Manual page 350

FRONT WHEEL/SUSPENSION/STEERl"
Tighten the clutch lever bracket pinch bolt by aligning
the punch marks on the left handlebar and clutch
lever bracket.
TORQUE:
Install the left handlebar switch housing aligning its
locating pin with the hole in the handlebar.
Tighten the forward screw first, then the rear screw.
Install the right handlebar switch housing by aligning
its locating pin w i t h the hole in the handlebar.
13-8
12 N-rn (1.2
PIN
SWITCH HOUSING
SCREWS