Install the green outer clutch disc i n the shallow slot
on the clutch outer.
Install the lifter bearing into the pressure plate.
Install the clutch lifter piece into the lifter bearing.
Install the pressure plate.
Install the clutch springs and spring bolts.
Tighten the bolts in a crisscross pattern in t w o t o three
steps, then tighten the bolts to the specified torque.
TORQUE: 12 N*m (1.2 kgf-m,
Install the right crankcase cover (page 9-17).
GEARSHIFT LINKAGE REMOVAL
Remove the following:
- Right crankcase cover (page 9-3)
- Clutch assembly (page 9-41
Remove the bolt and gearshift pedal link.
9 Ibfmft)