Honda 954 Service Manual page 412

HYDRAULIC BRAKE
On the front brake, install the reservoir cap, and tight-
en the screws.
Tighten the master cylinder reservoir mounting nut
securely.
On the rear brake, install the reservoir cap securely,
then install the reservoir onto the frame and tighten
the mounting bolt.
FRONT BRAKE PAD REPLACEMENT
the brake pads in
Loosen the pad pins.
Remove the bolts and brake caliper.
sure
the caliper pistons all the way i n
Check t!Je biake
brake master
as this opeiation
causes the /eve/
to rise
' I 5-8
allow instal-
IR
CAP
\
NUT