Honda 954 Service Manual page 57

Install the seat rail and tighten the mounting
nuts t o the specified torque.
TORQUE:
8 m m bolt: 39 N . m
m m
Install the regulator/rectifier, tighten the bolts.
Install the left pillion footpeg bracket and tighten the
socket bolts t o the specified torque.
TORQUE: 39
Install the right pillion footpeg bracket and tighten the
socket bolts t o the specified torque.
TORQUE:
Install the muffler mounting bolt, washer and nut, and
tighten the nut securely.
Install the removed parts in the reverse order of
removal.
MUFFLER/EXHAUST PIPE
REMOVAL
Do not service the exhaust system while
Remove the lower cowl (page 2-71.
Remove the exhaust pipe-to-muffler joint nuts.
Remove the muffler mounting bolt/nut and washer,
then remove the muffler.
(4.0
nut: 39 N-m (4.0 kgf-m, 29
(4.0
3 9 N*m (4.0
boll :s a md
it is hot.
2-13