Honda 954 Service Manual page 76

Turn the crankshaft clockwise
the index line on the ignition pulse generator rotor so
it is facing up as shown.
Check the valve clearance for the
Record the dear-
der exhaust valves using a feeler gauge.
vaive for refer-
e
VALVE CLEARANCE:
nce
EX: 0.27
ment required
ADJUSTMENT
Remove the camshaft (page 8-7).
Remove the valve lifters and shims.
Shims m a y stick to the inside of the valve lifter.
not allow the shims t o fall into the crankcase.
Mark all valve lifters and shims t o ensure correct
reassembly in their original locations.
The valve lifter can be easily removed w i t h a valve
lapping tool or magnet.
The shims can be easily removed w i t h tweezers
a magnet.
Clean the valve shim contact area i n the valve lifter
with compressed air.
turn (ISO"), and align
and
0.03 mm (0,011 0.001 in)
cylin-
EXHAUST VALVES
D
O
o r
MAINTENANCE
VALVE LIFTER