Honda 954 Service Manual page 160

FUEL SYSTEM (Programmed Fuel Injection)
PGM-FI MIL 35 BLINKS (EGCV AND AIR INTAKE VALVE SERVO MOTQR)
Turn the ignition switch t o "OFF".
Disconnect the servo motor 6P connector.
Check for loose or poor contact on the servo
motor 6P connector.
Connect the servo motor 6P connector.
Place the motorcycle on its side stand.
Turn the ignition switch t o "ON" and check that
the MIL blinks.
Turn the ignition switch t o
engine stop switch t o "OFF".
Disconnect the servo motor 6P connector.
Disconnect the control cables f r o m the servo
motor.
Turn the ignition switch t o
the MIL blinks.
5-52
35 blinks
"OFF" and the
"ON"
and check that
35 blinks
Loose or poor contact o n the servo motor 6P con-
No blinks
Check the EGCV, air intake valve and cables.