Honda 954 Service Manual page 132

FUEL SYSTEM (Programmed Fuel Injection)
eck for loose or poor contact on the vehicle
Connect the vehicle
Start the engine.
UP
With the side stand and keep the engine rev
more than 5,000 r p m about 20 seconds or more.
Check that the MIL blinks.
ignition switch to "OFF"
Disconnect the vehicle speed sensor 3P connec-
tor.
Turn the ignition switch t o
Measure the voltage at the wire harness side
con n ecto r.
Connection: Black/Brown
Standard: 12
5-24
11 blinks
"ON".
-
Does not blink
Loose or poor contact on the vehicle speed sensor
connector
Out of range
Open or short circuit in Black/Brown wire
I