Honda 954 Service Manual page 151

Check the continuity between the
connector terminal and ground.
Connect the sensor connector.
Turn the ignition switch t o "ON" and warm up
the engine until the coolant temperature is 80°C
I
Operate the throttle grip and snap the engine
speed from idle t o 5,000 rpm.
I
f
Check the voltage between the test harness ter-
minals.
-
Connection: B I Z A26
Standard:
With the throttle fully open:
0.6 V minimum
With the throttle quickly closed:
0.4 V maximum
FUEL SYSTEM (Programmed Fuel
Continuity
sensor
!
Out of range
Short circuit in sensor Orangewhite wire
Faulty O ~ s e n s o r
Injection)
5-43