Honda 954 Service Manual page 343

SERVICE INFORMATiON
TROUBLESHOOTING
HANDLEBARS
SERVICE INFORMATION
GENERAL
When servicing the front wheel, fork or steering stem, support the motorcycle using a safety stand or hoist.
A contaminated brake disc or pad reduces stopping power. Discard contaminated pads and clean a contaminated disc
with a high quality brake degreasing agent.
After front wheel installation, check the brake operation by applying the brake lever.
Refer t o section 15 for brake system information.
Use only tires marked "TUBELESS" and tubeless valves on rims marked "TUBELESS TIRE APPLICABLE".
SPECIFICATIONS
M i n i m u m tire tread depth
Cold tire pressure U p t o 90 kg (200 Ib) load
U p t o m a x i m u m weight capacity
Axle runout
Wheel rim runout Radial
Axial
Wheel balance weight
Fork Spring free length
Spring direction
Fork pipe runout
Recommended fork fluid
Fluid level
Fluid capacity
Pre-load adjuster initial setting
Tension adjuster initial setting
Compression adjuster initial setting
Steering head bearing pre-load
13-1
13-3
13-4
ITEM
FRONT WHEEL
FORK
STEERING STEM
I
STANDARD
250 kPa (2.50 kgf/cmz, 36 psi)
250 kPa (2.50 kgf/cm2, 36 psi)
255.8 (10.07)
With the tapered end facing up
Pro Honda Suspension Fluid SS-8
73 (2.9)
513 2.5 om3 (17.3 0.08 US
18.1 0.09 Imp oz)
7 turns f r o m full soft
2 turns f r o m full hard
2 turns f r o m full hard
11 - 16 N (1.1 - 1.6 kgf)
13-9
13-1 5
13-26
Unit: mm (in)
SERVICE LIMIT
1.5 (0.06)
0.20 (0.008)
2.0 (0.08)
2.0 (0.08)
60 g (2.1
250.8 (9.87)
0.20 (0.008)
oz,
max.