Cam Pulse Generator Rotor Bolt 2 - Honda 954 Service Manual

First gradually tighten the four bolts (No.5 - No.6 -
-
camshaft holders.
Gradually tighten the other camshaft holder bolts
until the camshaft holders lightly contact the cylinder
head surface.
Tightening the camshaft holder bolts on only one-side
might cause a camshaft holder to break.
Tighten all camshaft holder bolts i n the numerical
order casted on the camshaft holders.
TORQUE:
12 (1.2 kgf-rn,
In
case the cam sprockets were removed, tighten the
cam sprocket bolts t o the specified torque.
TORQUE: (2.0 k g f m , 14 Ibf-ft)
20
Turn the crankshaft clockwise one full turn (360") and
tighten the other cam sprocket bolts.
Install cam chain guide B, and tighten the bolts.
In case the cam pulse generator rotor bolts were
removed, tighten the rotor bolts t o the specified
torque.
TORQUE: 12 (1.2 kgf-m, 9 Ibf-ft)
9
CYLINDER HEADNALVES
C
CAM PULSE GENERATOR ROTOR
BOLTS
-27