Honda 954 Service Manual page 90

HEADLIG HT AIM
Place the motorcycle o n a level surface.
light beam as
specified by Iocai
Adjust the headlight beam vertically by turning the
laws and
regula-
vertica I beam adjuster.
tions
A clockwise rotation moves the beam u p and counter-
clockwise rotation moves the beam down.
Adjust the headlight beam horizontally by turning the
horizontal beam adjuster
A clockwise rotation moves the beam toward the right
side of the rider.
SYSTEM
CLUTCH
Measure the clutch lever free play at the end o f the
clutch lever.
FREE P L AY : 10
Minor adjustments are made using the upper adjuster
at the clutch lever.
Loosen the lock nut and turn the adjuster.
The adjuster may be damaged if it is positioned too
far out, leaving minimal thread engagement.
If
the adjuster is threaded out near its limit and the
correct free play cannot be obtained, turn the adjuster
all the way i n and back out one turn.
Tighten the lock nut and make a major adjustment as
described below.
Major adjustments are performed at the clutch arm.
Loosen the lock nut and turn the adjusting nut t o
adjust free play.
Hold the adjusting nut securely while tightening the
lock nut.
If proper free play cannot be obtained, or the clutch
slips during test ride, disassemble and inspect the
clutch (see section 9).
- -
MAINTENANCE
3-27