Reinstall the spark plug in the cylinder head and hand
tighten, then torque to specification.
TORQUE: 12 N-m (1.2
If using the new plug, install as follows:
Install and hand tighten the new spark plug, then
tighten it about 1/2 turn after the sealing washer con-
tacts the seat of the plug hole.
Install the direct ignition coils.
Connect the direct ignition coil connectors.
Install the radiator grommet onto the frame boss.
Install the washer and
radiator
then tighten the bolt.
mounting bolt,
MAINTENANCE
3-9