Honda 954 Service Manual page 130

FUEL SYSTEM (Programmed Fuel Injection)
Turn the ignition switch to "OFF"
Disconnect the IAT sensor 2P connector.
Check for loose or poor contact on the IAT sen-
sor connector.
Connect the IAT sensor 2P connector.
Place the motorcycle on its side stand.
Turn the ignition switch to "ON".
Check that the MIL blinks.
I
Turn the ignition switch to "OFF".
Disconnect the IAT sensor 2P connector.
Measure the resistance
- -
30 "C/68 86
-
4 kR
Standard: 1
Turn the ignition switch to "ON".
5-22
9 blinks
the IAT sensor 20
a t ( a t
Normal
Does not blink
Loose or poor contact on the IAT sensor connector
Abnormal
Faulty IAT sensor