Honda 954 Service Manual page 386

REAR WHEEL/SLIISPENSION
Install the driven flange assembly into the left wheel
hub.
If the driven sprocket was removed, install the driven
sprocket and tighten t h e nuts.
TORQUE: 64 N.m (6.5 kgf-m, 47 Ibf-ft)
Apply grease t o the dust seal lips, then install it into
the driven flange.
Install the brake disc w i t h its direction o f rotation
mark facing out.
Install and tighten the new bolts t o the specified
torque.
TORQUE: 42 N-m (4.3 kgfom, 31 Ibf-ft)
Apply grease t o the dust seal lips, then install it into
the wheel hub.
INSTALLATION
Apply grease t o the side collar inside and grooves.
Install the side collars.
Install the rear brake caliper bracket onto the guide of
the swingarm.
14-8