REAR WHEEL
REMOVAL
Support the motorcycle using a safety stand o r hoist,
raise the rear wheel off the ground.
Adjust the drive chain slack fully (page 3-20).
Remove the axle nut and drive chain adjusting plate.
Push the rear wheel forward.
Remove the drive chain from the
Remove the axle and drive chain
the left side and remove the rear
Remove the side collars.
I N S P E CTI
Axle
Place the axle in V-blocks and measure the runout.
Actual runout is 1/2 the total indicator reading.
SERVICE
driven sprocket.
adjusting plate f r o m
wheel.
0
N
LIMIT:
0.20 mm (0.008 in)
REAR WHEEL/SUSPENSION