End Of Travel Limit Phasing - Aerotech HPe 150 Hardware Manual

Installation and Configuration

2.3.5.1. End Of Travel Limit Phasing

If the EOT limits are reversed, you will be able to move further into a limit but be unable to move out. To
correct this, swap the connections to the CW and CCW inputs at the J207 connector. The logic level of the
EOT limit inputs may be viewed in the diagnostic display (shown in
www.aerotech.com
Figure 2-24: Limit Input Diagnostic Display
Chapter 2
Ensemble HPe 150/200
Figure 2-24).
41