Encoder Fault Interface (J207); Table 2-12: Encoder Fault Interface Pin Assignment (J207) - Aerotech HPe 150 Hardware Manual

Ensemble HPe 150/200

2.3.4. Encoder Fault Interface (J207)

The encoder fault input is used with encoders having a fault output. Each manufacturer uses this signal to
indicate different faults.
Table 2-12: Encoder Fault Interface Pin Assignment (J207)
Pin# Description
23 Encoder Fault Input
+3.3V
74AC16244
38
10K
Figure 2-21: Encoder Fault Interface Input (J207)
Chapter 2
Installation and Configuration
+5V
ENCODER FAULT
In/Out/Bi
Input
J207-23
www.aerotech.com