Solid State Relay Specifications (Tb202); Table 2-34: Relay Specifications - Aerotech HPe 150 Hardware Manual

Ensemble HPe 150/200

2.6.1. Solid State Relay Specifications (TB202)

The user must verify that the brake power requirements are within the specifications of the Brake control
relay listed below.
Table 2-34: Relay Specifications
Solid State Relay Rating (M173 / PS710E-1A), Aerotech PN: ECS1079
Maximum Voltage
Maximum Current
Maximum Power
Output Resistance
Turn-on/Turn-off Time
W A R N I N G : Do not exceed the maximum specifications.
60
24 VDC
0.5 Amps
560 mW
0.1 ohm (typical)
< 3 ms (with 500 ohm load at 5 VDC)
Chapter 2
Installation and Configuration
www.aerotech.com