Table of Contents
Advertisement
Electrical Safety
Safety Procedures and Warnings
The following statements apply wherever the Warning or Danger symbol appears within this manual. Failure
to observe these precautions could result in serious injury to those individuals performing the procedures
and/or damage to the equipment.
N O T E : Read this manual in its entirety before installing, operating, or servicing this product. If you do
not understand the information contained herein, contact an Aerotech representative before proceeding.
Strictly adhere to the statements given in this section and other handling, use, and operational information
given throughout the manual to avoid injury to you and damage to the equipment.
N O T E : Aerotech continually improves its product offerings; listed options may be superseded at any
time. All drawings and illustrations are for reference only and were complete and accurate as of this
manual's release. Refer to www.aerotech.com for the most up-to-date information.
D A N G E R : This product contains potentially lethal voltages. To reduce the possibility of
electrical shock, bodily injury, or death the following precautions must be followed.
1. Disconnect electrical power before making any mechanical adjustments or performing
maintenance.
2. Disconnect electrical power before performing any wiring.
3. Access to the Ensemble HPe 150/200 and component parts must be restricted while
connected to a power source.
4. To minimize the possibility of electrical shock and bodily injury, extreme care must be
exercised when any electrical circuits are in use. Suitable precautions and protection must
be provided to warn and prevent persons from making contact with live circuits.
5. Install the Ensemble HPe 150/200 inside a rack or enclosure.
6. Do not connect or disconnect any electrical components or connecting cables while
connected to a power source.
7. Make sure the Ensemble HPe 150/200 and all components are properly grounded in
accordance with local electrical safety requirements.
8. Operator safeguarding requirements must be addressed during final integration of the
product.
D A N G E R : The Ensemble HPe 150/200 case temperature may exceed 75°C in some
applications.
www.aerotech.com
Ensemble HPe 150/200
xi
Advertisement
Table of Contents
