Table 5-4: Control Board Fuse Information - Aerotech HPe 150 Hardware Manual

Ensemble HPe 150/200
Table 5-4: Control Board Fuse Information
Fuse Description
F1 Radial Lead Resettable Fuse
F2 Surface Mount Fuse
F3 Surface Mount Fuse
F4 Surface Mount Fuse
F5 Surface Mount Fuse
F6 Resettable Fuse
Table 5-5: LED Description
LED
ENB/FLT
MARKER
PWR*
POS
* If the power light flashes continuously and the unit does not operate, there is too much current draw from the 5V power supply or
the control supply voltage level is low.
100
Size
3 A
.05 A
.05 A
.05 A
.05 A
.5 A
Description
Turns green to indicate that the axis is enabled. Turns red to indicate a fault con-
dition. The ENB/FLT LED will flash between RED and GREEN if the drive is
enabled and in a fault condition.
Turns green to indicate that the marker input is high.
Turns green when power is applied.
Turns green to indicate that the axis is in position.
Chapter 6
Aerotech P/N Manufacturer's P/N
EIF01001 Raychem RGE300
EIF01028 Raychem MICROSMD005F-2
EIF01028 Raychem MICROSMD005F-2
EIF01028 Raychem MICROSMD005F-2
EIF01028 Raychem MICROSMD005F-2
EIF01002 Raychem MINISMDC050
www.aerotech.com
Maintenance