Faulty Device Replacement - Hirschmann RS20 User Manual

Entering the IP Parameters

2.9 Faulty Device Replacement

The device provides 2 plug-and-play solutions for replacing a faulty device
with a device of the same type (faulty device replacement):

Configuring the new device using an AutoConfiguration Adapter
page 37 "Loading the system configuration from the ACA")
 configuration via DHCP Option 82
Server with Option 82")
In both cases, when the new device is started, it is given the same
configuration data that the replaced device had.
Note: If you are replacing a device with DIP switches, check the DIP switch
settings to ensure they are the same.
UM BasicConfig L2E
Release 8.0 05/2013
2.9 Faulty Device Replacement
(see on page 196 "Setting up a DHCP
(see on
or
51