Table of Contents
Advertisement
1
Device description
The devices allow you to set up switched industrial Ethernet networks that
conform to the IEEE 802.3 standard in line and ring structures.
MS20
1
1
2
2
2
Figure 1: MICE basic module equipped with media modules
1 - basic module
2 - media module
3 - slot for media module
The MS20/MS30 devices provide you with a range of switch variants. You
can set up your switch to meet your individual requirements with regard to the
transmission media type, the number of 10/100 Mbit/s ports you want (8, 16
or 24), the number of 1000 Mbit/s ports (up to 2), the temperature range,
voltage range, certificates and software variant.
The devices are modular network components. They are designed for the
special requirements of industrial automation. They meet the relevant
industry standards, provide very high operational reliability, even under
extreme conditions, and also long-term reliability and flexibility. The devices
operate without fans and have a redundant voltage supply. The switches are
very quickly mounted by snapping them onto a hat rail, which also
automatically contacts the function ground.
The HIPER-Ring redundancy concept enables you to quickly carry out a
reconfiguration, and also a simple configuration with only one additional
connection. The diagnosis display and the display of the operating
parameters and the large label areas provide a quick overview.
It can be easily managed via a Web browser, via Telnet, with a management
software product (such as HiVision) or locally on the switch (V.24 interface).
The devices provide you with a large range of functions. Information
pertaining to these functions is found in the relevant operating software
manuals. These manuals are available as PDF files on the CD ROM
provided, or you can download them from the Internet on the Hirschmann
product pages (www.hirschmann.com).
16
1
3
4
1
2
2
3
MS30
2
3
4
5
2
2
2
2
MS20/MS30 MS20/MS30
Release 10 07/2012
Advertisement
Table of Contents
