3.4
Mounting the device with holding brackets
In the delivery state, there are 2 pre-mounted holding brackets on the bottom
sides of the device.
Figure 2: Device with 2 pre-mounted holding brackets on the bottom sides of the
device
Mount the device (fixed installation) with the 2 holding brackets
horizontally in driving direction forward as shown in the following picture:
Driving direction forward
Figure 3: Mounting of the device horizontally in driving direction forward (fixed
installation)
Note: Alternatively, you can mount the holding brackets on the top sides of
the device:
Remove the 2 pre-mounted holding brackets from the bottom sides of the
device.
Screw the 2 holding brackets to the top sides of the device.
Installation OWL LTE M12
Release 04 06/2017
15