Loading Software Updates
4.4 Loading the Software via File
Selection
For a software update via a file selection window, the device software must
be on a data carrier that you can access from your PC.
Select the Basics:Software dialog.
In the file selection frame, click on "...".
In the file selection window, select the device software (name type:
*.bin, e.g. device.bin) and click on "Open".
Click on "Update" to transfer the software to the device.
The end of the update is indicated by one of the following messages:
Update finished.
Update aborted. Reason: incorrect file.
Update aborted. Reason: saving unsuccessful.
File not found (reason: file name not found or does not exist).
Unsuccessful Connection (reason: path without file name).
After the update is completed successfully, you activate the new
software:
Select the Basic settings: Restart dialog and perform a cold
start.
In a cold start, the device reloads the software from the non-volatile
memory, restarts, and performs a self-test.
In your browser, click on "Reload" so that you can access the device
again after it is booted.
UM BasicConfig L2E
Release 8.0 05/2013
4.4 Loading the Software via File
Selection
75