Hirschmann RS20 User Manual page 33

Entering the IP Parameters
Note: If a terminal or PC with terminal emulation is unavailable in the vicinity
of the installation location, you can configure the device at your own
workstation, then take it to its final installation location.
 Set up a connection to the device
Monitor").
The start screen appears.
NOTE: Enter '?' for Command Help. Command help displays all options
that are valid for the 'normal' and 'no' command forms.
the syntax of a particular command form, please consult the
documentation.
(Hirschmann PowerMICE) >
 Deactivate DHCP.
 Enter the IP parameters.

Local IP address
On delivery, the device has the local IP address 0.0.0.0.
 Netmask
If you divided your network into subnetworks, and if these are
identified with a netmask, then enter the netmask here.
UM BasicConfig L2E
Release 8.0 05/2013
2.2 Entering IP parameters via CLI
(see on page 14 "Starting the System
For
33