Hirschmann RS20 User Manual page 137

Network Load Control
enable
configure
classofservice
ip-dscp-mapping cs1 1
show classofservice ip-dscp-mapping
IP DSCP
-------------
0(be/cs0)
1
.
.
8(cs1)
.
Always assign the DSCP priority to received IP data

packets globally
 Open the
 Select trustIPDSCP in the "Trust Mode" line.
enable
configure
classofservice trust ip-
dscp
exit
exit
show classofservice trust
Class of Service Trust Mode: IP DSCP
Configuring Layer 2 management priority

 Configure the VLAN ports to which the device sends management
packets as a member of the VLAN that sends data packets with a tag
(see on page 144 "Examples of
 Open the
 In the "VLAN Priority for Management packets" field, you enter the
value of the VLAN priority.
UM BasicConfig L2E
Release 8.0 05/2013
Traffic Class
-------------
2
2
1
QoS/Priority:Global
QoS/Priority:Global
Switch to the privileged EXEC mode.
Switch to the Configuration mode.
Assign traffic class 1 to DSCP CS1.
dialog.
Switch to the privileged EXEC mode.
Switch to the Configuration mode.
Assign the "trust ip-dscp" mode globally.
Switch to the Configuration mode.
Switch to the privileged EXEC mode.
Display the trust mode.
VLANs").
dialog.
8.4 QoS/Priority
137