Hirschmann RS20 User Manual page 91

Assistance in the Protection from
Unauthorized Access
 Select the Security:Telnet/Web access dialog.
 Disable the server to which you want to refuse access.
enable
configure
lineconfig
transport input telnet
no transport input telnet
exit
exit
ip http server
no ip http server
6.2.7 Web access through HTTPS
The HTTPS communication protocol (HyperText Transfer Protocol Secure)
helps protect data transfers from interception. The device uses the HTTPS
protocol to encrypt and authenticate the communications between web
server and browser.
The Web server uses HTTP to load a Java applet for the graphical user
interface onto your computer. This applet then communicates with the device
by SNMP (Simple Network Management Protocol). If you have enabled the
Web Server (HTTPS) function, the Java applet starts setting up a
connection to the device via HTTPS. The device creates an HTTPS tunnel
through the SNMP. It uses DES encoding on 56 bits. You can upload HTTPS
certificates to the device.
UM BasicConfig L2E
Release 8.0 05/2013
6.2 Password for SNMP access
Switch to the privileged EXEC mode.
Switch to the Configuration mode.
Switch to the configuration mode for CLI.
Enable Telnet server.
Disable Telnet server.
Switch to the Configuration mode.
Switch to the privileged EXEC mode.
Enable Web server.
Disable Web server.
91