Loading Software Updates
Figure 16: Software update dialog
After successfully loading it, you activate the new software:
Select the dialog Basic Settings:Restart and perform a cold
start.
In a cold start, the device reloads the software from the permanent
memory, restarts, and performs a self-test.
After booting the device, click "Reload" in your browser to access the
device again.
enable
copy
tftp://10.0.1.159/product.b
in system:image
74
4.3 Loading the software from the
Switch to the privileged EXEC mode.
Transfer the "product.bin" software file to the
device from the tftp server with the IP address
10.0.1.159.
TFTP server
UM BasicConfig L2E
Release 8.0 05/2013