Network Load Control
8.1 Direct Packet Distribution
With direct packet distribution, you help protect the device from unnecessary
network loads. The device provides you with the following functions for direct
packet distribution:
Store-and-forward
Multi-address capability
Aging of learned addresses
Static address entries
Disabling the direct packet distribution
8.1.1
Store and Forward
The device stores receive data and checks the validity. The device rejects
invalid and defective data packets (> 1522 bytes or CRC errors) as well as
fragments (> 64 bytes). The device then forwards valid data packets.
8.1.2
Multi-Address Capability
The device learns all the source addresses for a port. Only packets with
unknown destination addresses
these destination addresses or
a multi/broadcast destination address
in the destination address field are sent to this port. The device enters
learned source addresses in its filter table
Addresses").
112
8.1 Direct Packet Distribution
(see on page 114 "Entering Static
UM BasicConfig L2E
Release 8.0 05/2013