Loading/saving settings
Example of loading from a tftp server
Before downloading a file from the tftp server, you have to save the
configuration file in the corresponding path of the tftp servers with
the file name, e.g. switch/switch_01.cfg
"Saving in a binary file on a
In the "URL" line, enter the path of the tftp server, e.g.
tftp://10.1.112.214/switch/switch_01.cfg.
Figure 14: Load/Save dialog
enable
copy
tftp://10.1.112.159/switch/c
onfig.dat
nvram:startup-config
UM BasicConfig L2E
Release 8.0 05/2013
URL").
Switch to the privileged EXEC mode.
The device loads the configuration data from a
tftp server in the connected network.
3.1 Loading settings
(see on page 62
57