Loading From The Autoconfiguration Adapter - Hirschmann RS20 User Manual

Loading/saving settings
3.1.4

Loading from the AutoConfiguration Adapter

Loading a configuration during the boot procedure

If you connect an ACA to the device and if the passwords on the device
are in the default setting, missing, or the same as those on the ACA, the
device automatically loads its configuration from the ACA during the boot
procedure. After booting, the device updates its configuration in the local
non-volatile memory with the configuration from the ACA.
Note: During the boot procedure, the configuration on the ACA has
priority over the configuration in the local non-volatile memory.
The chapter "Saving locally (and on the ACA)" on page 60
you can save a configuration file on an ACA.
Reporting configuration differences

The device allows you to trigger the following events when the
configuration stored on the ACA does not match the configuration on the
device:

send a trap
 update the device status
Status"),

update the status of the signal contacts
the Signal
UM BasicConfig L2E
Release 8.0 05/2013
(see on page 161 "Configuring
(see on page 164 "Configuring the Device
Contact").
3.1 Loading settings
describes how
Traps"),
(see on page 167 "Controlling
59