Hirschmann RS20 User Manual page 82

Configuring the Ports
#selftest reboot-on-error
enable
#selftest reboot-on-error
seriousOnly
#selftest reboot-on-error
disable
#show selftest
82
Switch on the "Cold start if error detected" function.
Switch on the "Cold start only if serious error
detected" function.
Switch off the "Cold start if error detected" function
(enabled in the as-delivered state).
Show status of the "Cold start if error detected"
function (Enabled/Disabled/seriousOnly).
UM BasicConfig L2E
Release 8.0 05/2013