Hirschmann RS20 User Manual page 18

Access to the user interfaces
Opening the Command Line Interface

 Connect the device to a terminal or to a "COM" port of a PC using
terminal emulation based on VT100, and press any key
page 14 "System Monitor")
call up the Command Line Interface via Telnet.
A window for entering the user name appears on the screen.
Up to 5 users can access the Command Line Interface.
Copyright (c) 2004-2010 Hirschmann Automation and Control GmbH
User:
Figure 3: Logging in to the Command Line Interface program
 Enter a user name. The default setting for the user name is admin .
Press the Enter key.
 Enter the password. The default setting for the password is private .
Press the Enter key.
You can change the user name and the password later in the
Command Line Interface.
Please note that these entries are case-sensitive.
The start screen appears.
18
or
All rights reserved
PowerMICE Release L3P-06.0.00
(Build date 2010-09-09 12:13)
System Name: PowerMICE
Mgmt-IP : 10.0.1.105
1.Router-IP: 0.0.0.0
Base-MAC : 00:80:63:51:74:00
System Time: 2010-09-09 13:14:15
1.2 Command Line Interface
(see on
UM BasicConfig L2E
Release 8.0 05/2013