Hirschmann RS20 User Manual page 34

Entering the IP Parameters
The default setting of the netmask is 0.0.0.0.

IP address of the gateway.
You require this entry when installing the device in a different
subnetwork as the management station or TFTP server
page 29 "Example of how the network mask is
Enter the IP address of the gateway between the subnetwork with the
device and the path to the management station.
The default setting of the IP address is 0.0.0.0.
 Save the configuration entered using
copy system:running-config nvram:startup-config.
enable
network protocol none
network parms 10.0.1.23
255.255.255.0
copy system:running-config
nvram:startup-config
After entering the IP parameters, you easily configure the device via the
graphical user interface (see the "GUI" reference manual).
34
2.2 Entering IP parameters via CLI
used").
Switch to the privileged EXEC mode.
Deactivate DHCP.
Assign the device the IP address 10.0.1.23 and
the netmask 255.255.255.0. You have the option
of also assigning a gateway address.
Save the current configuration to the non-volatile
memory.
(see on
UM BasicConfig L2E
Release 8.0 05/2013