Hirschmann RS20 User Manual page 89

Assistance in the Protection from
Unauthorized Access
Figure 19: SNMPv1/v2 access dialog
 To create a new line in the table click "Create".
 To delete an entry, select the line in the table and click "Remove".
6.2.3 Description of Telnet Access
The Telnet server of the device allows you to configure the device using the
Command Line Interface (in-band). You can deactivate the Telnet server to
inactivate Telnet access to the device.
The server is activated in its default setting.
After the Telnet server has been deactivated, you will no longer be able to
access the device via a new Telnet connection. If a Telnet connection already
exists, it is retained.
UM BasicConfig L2E
Release 8.0 05/2013
6.2 Password for SNMP access
89