Hirschmann RS20 User Manual page 136

Network Load Control
enable
configure
interface 1/1
vlan priority 3
exit
Assigning VLAN priority to a traffic class

 Select the
QOS/Priority:802.1D/p-Mapping dialog.
 In the "Traffic Class" column, enter the desired values.
enable
configure
classofservice dot1p-
mapping 0 2
classofservice dot1p-
mapping 1 2
exit
show classofservice dot1p-
mapping
User Priority
-------------
0
1
2
3
4
5
6
7
Assigning the traffic class to a DSCP

 Select the
QOS/Priority:IP DSCP Mapping dialog.
 In the "Traffic Class" column, enter the desired values.
136
Switch to the privileged EXEC mode.
Switch to the Configuration mode.
Switch to the Interface Configuration mode of
interface 1/1.
Assigns port priority 3 to interface 1/1.
Switch to the Configuration mode.
Switch to the privileged EXEC mode.
Switch to the Configuration mode.
Assign traffic class 2 to VLAN priority 0.
Also assign traffic class 2 to VLAN priority 1.
Switch to the privileged EXEC mode.
Display the assignment.
Traffic Class
-------------
2
2
0
1
2
2
3
3
8.4 QoS/Priority
UM BasicConfig L2E
Release 8.0 05/2013