Entering the IP parameters
2.9 Faulty Device Replacement
There are two plug-and-play solutions available for replacing a faulty Switch
with a Switch of the same type
(Faulty Device Replacement):
D
First, you can configure the new switch using an AutoConfiguration
Adapter
(see
"Loading the system configuration from the ACA" on page
D
Second, you can configure the new switch using DHCP Option 82
(see
"System Configuration via DHCP Option 82" on page
In both cases, the same configuration data which the faulty Switch had are
transferred to the new Switch during booting.
Basic - L3P
Release 3.1 06/07
2.9 Faulty Device Replacement
37) or
46).
49